How to Fix Windows XP

You often find errors in your computer, such as the system32 is missing or corrupt your windows XP, and the other damaged the road so that it can disrupt the system on your computer. Very reasonable if it happens like that, considering now that the virus evolved and became the intimidating Netter in the world. Here are 5 ways that can be used, according to the type of error.

^^ If the directory \ WINDOWS \ System32 \ Config is broken or missing

If you get the error message as follows:

"Windows could not start because the following files is missing or corrupt
\ WINDOWS \ System32 \ Config \ SYSTEM or \ WINDOWS \ System32 \ Config \ SOFTWARE "


Solution:

  1. Insert the Windows XP CD and booting from the CD.
    At the time shown R = Repair option first, press R.
  2. Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.
  3. Usually # 1
  4. Enter the administrator password if required.
  5. Write: cd \ windows \ system32 \ config
  6. Next depending on the location where the occurrence of the damage:
  7. Write: ren software software.corrupt or ren system system.corrupt
  8. Next again also depends on the location where the occurrence of the damage:
  9. Write: copy \ windows \ repair \ system
  10. Write: copy \ windows \ repair \ software
  11. Remove your CD and type EXIT.

^^ How to Improve Installation

If your Windows XP is corrupted or damaged you will not have any other operating system for booting, You can do a repair installation work as the the beginning.
Solution:
  1. Make sure you have the key to a valid Windows XP.
    If you requested administrator password, you should choose the second repair option, not the first.
  2. Insert your Windows XP CD and booting from the CD to do it.
  3. The repair option will appear the second R = Repair, press R
    This will start the repair.
  4. Press F8 to agree to further the process "I Agree at the Licensing Agreement"
  5. Press R when the directory where you installed Windows XP. Usually C: \ WINDOWS
    Checks will be done next drive C: and start copying files.
    And automatically restart if needed. Leave the CD in your drive.
  6. Next you will see a picture "progress bar" that is part of the improvement, he seem like the installation of XP is usually normal, including "Collecting Information, Dynamic Update,
    Preparing Installation, Installing Windows, Finalizing Installation ".
  7. When asked, click Next
  8. When asked to enter a keyword, enter the key Windows XP your valid.
  9. Normally you want to remain in the domain or workgroup name the same.
  10. Computer will restart.
  11. Then you will have the same screen as the system during normal installation.
  12. Register if you want it (usually not needed).
  13. Done.
Now you can log in with your existing account.


^^ If NTOSKRNL Damaged or Missing

If you find an error message as follows: "NTOSKRNL not found".

Solution:
  1. Insert the Windows XP CD and booting from the CD.
  2. At the time shown R = Repair option first, press R.
  3. Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.
  4. Usually # 1
  5. Move to drive the CD Drive you are.
  6. Write: CD i386
  7. Write: ntkrnlmp.ex_ expand C: \ Windows \ System32 \ ntoskrnl.exe
  8. If you installed Windows XP in place, then change according to location.
  9. Remove your CD and type EXIT

^^ HAL.DLL Damaged or Missing

If you get error messages regarding the loss or corrupted hal.dll file, it is possible
BOOT.INI file has incorrect configuration.
Solution:

  1. Insert the Windows XP CD and booting from the CD.
  2. At the time shown R = Repair option first, press R.
  3. Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.
  4. Usually # 1
  5. Write: bootcfg / listShowing content / BOOT.INI file on the input at this time
  6. Write: bootcfg / rebuildImprove the configuration of the BOOT.INI file
  7. Remove your CD and type EXIT

^^ NTLDR not found or NTDETECT.COM

If you find an error that NTLDR is not found while booting
Solution:

I. To partition type FAT
  1. Please make your booting from the Win98 floppy and copy your files NTLDR or NTDETECT.COM
    from the i386 directory to the parent drive / root (root) C: \

II. To partition type NTFS
  1. Insert the Windows XP CD and booting from the CD.
  2. At the time shown R = Repair option first, press R.
  3. Press the number corresponding to the location of the Windows installation that you want to regenerate the appropriate.
  4. Usually # 1
  5. Enter the administrator password if required.
  6. Enter the following command, where X: is the address of the CD ROM drive you (Customize!).
  7. Write: COPY X: \ i386 \ NTLDR C \:
  8. Write: COPY X: \ i386 \ NTDETECT.COM C: \
  9. Remove your CD and type EXIT.

Hopefully useful.




Related Posts

Post a Comment

 

Recent Comments

Reader Community

Recent Posts